Kalika S1 One Button Door Phone

 £310.00
(ex. VAT)
Kalika S1 One Button Door Phone
  • One Button Door Phone
  • Surface Mounted
  • System Size: 151 x 157 x 80 (mm) approx.
  • Connect via Two Wire Analogue extension or line
  • Two Relays
  • Easy to Program (See Quick Programming Guides)
  • Can operate without power supply

  • Power Supply is an extra £ 19.50 + vat

    		•
    Available Downloads
    Kalika - Operating Instructions (1715.43 kb)
    Kalika - Pre-Assembled Systems (270.26 kb)
    Kalika - S1 Quick Installation Guide (253.1 kb)
    Reviews

    Related Products
    North Supply Brass Range Door Intercoms
    North Supply Brass Range Door Intercoms    		 Nortel Door Opening Controller
    Nortel Door Opening Controller    		 Kalika S3 Six Button Door Phone
    Kalika S3 Six Button Door Phone
    Quick Installation Guide

    Before starting to program the S1 door phone it is important to determine the following:

  • The extension number that has been assigned to the S1 door phone
  • The extension or hunt group number that the S1 door phone is to call when the button is pressed
  • The unit can be programmed to call two different numbers allowing the use of the day and night mode feature available on the unit.
  • If you do not intend to use the day and night mode feature then it is recommended that both the day and night modes are both programmed with the same extension or hunt group number

    After the Ulydor S1 door phone has been connected to the PBX, call it using the assigned extension number from any telephone. When the S1 door phone answers, key #0000 and wait for the tones (beep, beep, pause – This will repeat continuously), indicating that you are in programming mode.
    Now enter the following using the telephone keypad:
  • Enter 101 followed by the extension or hunt group number for day mode

  • Wait for Tone – Single beep

  • Enter 201 followed by the extension or hunt group number for night mode

  • Wait for Tone – Single beep

  • Enter 9 the door phone hangs up

    You have now successfully programmed the unit to call the desired numbers. When a call is received from the door phone it is possible to release the door locking mechanism by entering 55 on your phone keypad.
    		•