Nortel Meridian Norstar M7100 Telephone is the most basic telephone in the M range of telephones. You have a single programmable button and you use all the system features using the feature key.

Target Audience

The Nortel Meridian Norstar M7100 Telephone is mainly uses in areas where people would not necessarily need to answer incoming calls also in areas like warehouse where you would transfer call to it.

Applications

The Nortel Meridian Norstar M7100 provides phone coverage in areas where basic service is required, such as back office, reception areas, lobbies, and kitchens in offices.

Nortel Norstar M7100 Features

• One programmable memory button.
• Feature button.
• Time and Date Display.
• Handsfree Dialing.
• Volume Control.
• Contrast Level Control.
• Wall Mountable.
• One-line by sixteen-character LCD Window.
• Supported on all Norstar ICS Systems and BCM.
• Available in 3 Colours (Black, Beige and Grey).
  
  
  

Nortel Meridian Norstar M7100 User Guide/Manual

Nortel Meridian Norstar M7100 User Guide/Manual

USEFULL FEATURES FOR YOUR M7100 TELEPHONE

Button Inquiry
Confirm that your memory button has the correct snap-on cap by checking its programming

• 1. Rlease all calls and open lines with dial tones.
• 2. Press FEATURE Key followed by X then 0.
• 3. Read the display
• 4. Press FEATURE Key when finished.
  
  

Adgusting display contrast

• 1. Press Feature X then 7.
• 2. Press 1 to 9 for the level you want
  
  

Selecting a ring type and volume

• 1. Press FEATURE X then 6.
• 2. Press 1, 2, 3, or 4 to hear the differant types of rings.
• 3. While the telephone is ringing press volume up or down to adjust the volume.
• 4. Press FEATURE to store the ring
  
  

Adjusting recevier or telephone speaker volume

• 1. Press volume up or down when using the reciver or the speaker.
  
  

To Hold a call

• 1. Press HOLD
• 2. Press HOLD again to return to the call on hold. Check the display for confermation or additional information.
  
  

Programming Memory Button

External Autodial

• 1. If you are on a call or an open line with dial tone, press HOLD or RLS.
• 2. Press FEATURE X then 1.
• 3. Dial the external number.
• 4. Press HOLD to store the number
• 5. Label your new button.
  
  

Internal Autodial

• 1. If you are on a call or an open line with dial tone, press HOLD or RLS.
• 2. Press FEATURE X then 2.
• 3. Dial the internal number.
• 4. Label your new button.
  
  

Features

• 1. Ifyou are on a call or an open line with dial tone, press HOLD or RLS.
• 2. Press FEATURE X then 3.
• 3. Press FEATURE and the feature code.
• 4. Label your new button.
  
  

Erasing memory buttons

• 1. If your on a call or an open line with dial tone , press HOLD or RLS>
• 2. Press FEATURE X then 1.
• 3. Press HOLD to erase the button.